Pavement Management

Linear Cracking

Print this pageEmail this to someoneShare on FacebookTweet about this on TwitterShare on Google+Share on LinkedInShare on RedditDigg this


Linear cracks not associated with corner breaks or blowups that extend across the entire slab. Typically, these cracks divide an individual slab into two to four pieces. Often referred to as “panel cracking”.

Figure 1: Large panel cracks on highway.

Figure 2: Multiple panel cracks on a residential street.

Figure 3: Panel cracks in the truck lane of an Interstate highway.


Roughness, allows moisture infiltration leading to erosion of base/subbase support, cracks will eventually spall and disintegrate if not sealed

Possible Causes

Usually a combination of traffic loading, thermal gradient curling, moisture stresses and loss of support.


Slabs with a single, narrow linear crack may be repaired by crack sealing. More than one linear crack generally warrants a full-depth patch.




close citation

Thanks for sharing Linear Cracking.